NESS X SERIES FEATURES

56 USER CODES
Each user code can be assigned to AREA1, AREA2, CODE ONLY ARMING, ARM ONLY, KEYPAD CODE, RADIO CODE, ACCESS CODE READER1, 2 OR 3.

ACCESS CONTROL FUNCTIONS
New access control features with flexible programming options. Connect up to 3 access control proximity Weigand readers.

Use the access control option to open electric door locks or arm/disarm the panel or both!

ARM/DISARM USING PROX CARDS
The access control feature allows up to 55 individual users to arm and disarm using proximity access cards. Prox cards can even be used to operate electric doors locks for secure hands free entry.

MODULAR HOUSING
The new EB04 enhanced housing is tough and roomy with a removable lid for easy access. The housing is generously fitted with multiple standoff positions, cable tie loops, cable/conduit entry points and unique slide-in carriers for the new X Series accessory boards.

ACCESSORIES
A new range of X Series slide-in accessory boards includes a four Relay Board, a Reader Interface and the new X Series Output Expander for both the D8x and D16x panels.

MAIN SOFTWARE FEATURES

• 56 user codes can be assigned to 3 to 6 digits PIN codes with keypad options including Area assignment, Arm Only options, Code Only arming and much more.
• Two button arming feature..
• Fire Alarm feature with different siren tones..
• Input to output mapping..
• Programmable 2 area partitioning with overlapping of zones in areas allowed.
• Programmable sensitivity for vibration sensors - zone by zone basis.
• Programmable Long Response times for zones (1sec or 3sec).
• Monitor mode and Day Zone feature..
• Temporary Day Zone feature for Day Zone setup “On the fly”.
• Single or double trigger option on a zone-by-zone basis.
• Supports up to 55 Radio Keys..
• Access Control feature with provision for up to 3 Readers
  
• Supports up to 55 Proximity Access Cards or Fobs..
• Uses NessComms up/download software package
• Secure DTMF remote arming/disarming capabilities.
• Programmable siren/reset lockout.
• 30 event memory from keypad
• Expanded event memory can be accessed by NessComms™.
• Disable unused zones feature.
• Siren chirp/strobe flash on radio key arming with ‘quiet chirp’ option..
• Standard defaults to suit most applications..
• Quiet chirps on Arm/Disarm option.
• and much more...
  

MAIN HARDWARE FEATURES

• 8 or 16 Fully programmable zones..
• D16x has 16 physical zone inputs or Zone Split option..
• 2 additional 24hr inputs..
• End Of Line supervision 2K2 or 3K3 programmable..
• D8x supports up to 3 remote LED or LCD Keypads..
• D16x supports up to 3 remote LCD Keypads.
• Plug-in Radio Interface supports any Ness radio device
• New Serial port for connection to future accessories.
• Fast direct connect upload/download via the Serial port.
• Reader port connects up to 3 addressable access control readers
• Output Expander option for both D8x and D16x..
• New LISTEN pins allow the installer to diagnose dialler tones on site.
• True dynamic battery test hourly..
• 4 programmable auxiliary outputs..
• Programmable REX inputs for access control.
• Automatic resetting fuses on all outputs..
• Optional latching or momentary keyswitch arming option.
• Option for an extension sonalert to mimic all keypad beeps.
• New attractive and versatile housing with installer friendly design.
• Plug in accessory boards available..
• Complies with all relevant Australian and CE standards.
• and much more...