Little Fish Technologies

Sirens

	Standard Ness Horn Part No. NOI110 Ness 8 Ohm horn speaker. High output of 118db. For use on the siren output of any Ness control panel.
	Top Hat Screamer Part No. 100-238 12VDC internal screamer. 110db output. 150mA current draw.
	Flush Mount Screamer Part No. 100-004 Attractive 12V screamer for easy flush mounting. Connects to the reset output of any Ness panel.
	Ness Internal Noise Makers Ness Internal Horn Speaker Part No. 100-171 Ness Internal Siren Part No. 100-172 Two models to choose from, the Ness Internal Horn or the 12V driven Ness Internal Siren. Ness Internal Horn Speaker, designed for good looks and easy mounting to be used indoors. High output 122db, low current drain. For use on the siren output of any Ness control panel. This is an 8 Ohm speaker. The Ness Internal Siren, has a high powered 12VDC siren driver built in. High output 118db, 500mA current drain. For use on the Reset output of any Ness control panel.
	Mini Satellite Siren Part No. 100-228 A very low profile self-contained satellite siren with a high volume electronic siren and very large blue strobe light. The Mini Satellite offers protection against cut wires, (if the tamper circuit is connected), and physical attack. Rechargeable backup battery is built in. Can be used with any Ness control panel. 12VDC positive or negative trigger Operating voltage 10-15VDC Internal battery 6V NiCad Siren output 115db Strobe flash rate 80-140/min Tamper protection, lid and base Selectable siren timer 5, 10, 20 min Blue strobe lens. Dimensions 176 x 112 x 45mm
	Isis Satellite Siren Part No. 100-038 The Isis Satellite Siren features two high intensity strobe lights and a high volume electronic siren. The large, flat front area is suitable for applying the installer’s company sticker. As with the Mini Satellite, the Isis Satellite offers excellent protection for those jobs where audible warning is most important. Rechargeable backup battery is built in. Can be used with any Ness control panel. 12VDC positive or negative trigger Operating voltage 12-13.8VDC Internal battery 7.2V NiCad Siren output 118db Strobe flash rate 100/min Tamper protection, lid bolt and base Selectable siren timer 3, 10, 20, 40 min Blue strobe lens Dimensions 355 x 180 x 65mm
	Ness Poly-Tough Siren Cover Part No. 100-219 Poly-Tough siren covers are made of an extremely tough, injection moulded material. Poly-Tough siren covers are rust proof and UV stabilised to give years of protection. With pre-drilled strobe holes for faster installation. Supplied with a Tamper Kit including tamper switch, terminal block and connecting cable.

Strobes

Ness Strobe Light
Part No. NOI300

Low profile 1 Watt strobe light to suit Ness siren covers.
Continuous rated xenon tube.
Blue lens.

Ness Strobe Holder
Part No. 100-242

A surface mounting kit for the standard Ness strobe light. For applications where the strobe is used without a siren cover.